Infrared quartz heating tube is adopted by the special craft processing milky white quartz glass tube, with resistance hybrid material as fever son, due to the milky white quartz glass can absorb radiation from resistanse wire of almost all of the visible and near infrared, and makes them into a far infrared radiation.
2. Product features:
Quartz heating pipes need not coating, radiation rate stability, high temperature deformation, without harmful radiation, no environmental pollution, high temperature resistant, fight anti-erosion capability is extremely high, chemical stability, good thermal inertia, small thermal response speed, high thermal conversion efficiency.
3. Usage of products:
It can be widely used in mechanical, chemical, electronic textile, printing and dyeing, plastics, printing, food, food processing, medicine and health, leather etc heating dry, curing dehydration and all kinds of ways, HongFang, baking ovens heating equipment. Far infrared quartz electric heat pipe specially adapt in medicine and health care, research laboratory, request non-pollution conditions, including soda acid corrosive heating occasion.
4. Technical parameters:
Rated voltage: 380V, 220V, according to the needs of user 110V, (certain)
Components length: 300 - according to the needs of user 2500mm (production)
Components matching: 200-5000W
Element diameter: Ф 10-30mm (according to the needs of user production)
Thermal response speed: 3-5 minutes
Surface temperature: low temperature for 380 ~ 46 ℃ temperature for 500 ~ 580 ℃ according to user requirements increased to 700 ~ 750 ℃, or reduce to 100 ~ 300 ℃
Spectral range: 2.5-6 microns (higher radiation intensity) spectrum emission coefficient: 0.92 to 48Um) long
红外线石英加热管是采用了经特殊工艺加工的乳白石英玻璃管、配用电阻合材料作为发热子，由于乳白石英玻璃可以吸收来自电热丝辐射的几乎全部的可见光和近红外光、且能使之转化为远红外辐射。
2.产品特点：
石英加热管不用涂料，辐射率稳定、高温不变形、无有害辐射、无环境污染、耐高温、抗蚀能力极高，化学稳定性好、热惯性小、热响应速度快、热转换效率高。
3.产品用途：
它可广泛地应用于机电、化学、电子纺织、印染、塑料、印刷、粮食、食品加工、医学卫生、皮革等加热干燥，固化脱水及各类烘道、烘房、烘箱的加热设备上。远红外石英电热管特别适应于医药卫生、科研试验室、要求无污染的环境，含酸碱等腐蚀性加热场合.
4.技术参数：
额定电压：380V、220V、110V、（根据用户需要确定）
元件长度：300-2500mm（根据用户需要制作）
元件匹配：200-5000W
元件外径：Ф10-30mm（根据用户需要制作）
热响应速度：3-5分钟
表面温度：低温度为380~460℃ 中温度为500~580℃ ，可根据用户要求提高至700~750℃,或降低到100~300℃
光谱范围：2.5-6微米（有较高辐射强度）光谱发射系数：0.92（波 长为48Um）
|
Resistanse wire
